GM 1997 - 2004 LS1 LS6 W/ 4L60E Mech. TB Integrated Fuel Injection & Chassis

Painless Performance Integrated Chassis Painless Performance Integrated Chassis
  • Year: 1997-2004
  • Make: GM
  • Model: Camaro, Firebird, Corvette
  • Engine: 5.7L LS1 / LS6 w/ Cable Throttle Body
  • Trans: 4L60E

Our integrated EFI/Chassis harnesses are the perfect solution for anyone doing a complete rewire of a vehicle as well as transplanting a GM Gen III fuel injected engine. This kit is designed for use on 1997-2004 LS1 engines with a 4L60E transmission. The chassis wiring and fuel injection wiring are fully integrated into a single 26 circuit/7 relay fuse block, eliminating the need to have separate fuses and relays for the fuel injection. The chassis harness connections are the same GM color coded connections as our 10201 kit. The fuel injection connections include the same labels connections as our 60508 harnesses. These harnesses do not support flex fuel engines and require the use of a mechanical throttle body. Included in this kit you will also find a detailed step-by-step manual and all the required terminals & connectors for easy installation.

This harness also requires the following mating parts; ECM #12200411 (Painless # 60700)

Purchase this harness today and qualify for Painless Performance®™ to flash your ECM for free. Click here for details.

  • Number of Circuits: 26 Fuse with 7 Relays
  • Fuse Type: Mini Blade & Maxi Fuse
  • Firewall Passthrough: Multiple Grommet
  • Color Code Based: 2000 Camaro
  • Circuit Designations: Printed Wire Tags on all Connectors and Printed on Wire for Open Ended Wires

This harness includes circuits for:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Cruise Control
Courtesy & Dome Light
Electric Fuel Pump
Emergency Flashers
Cooling Fan Relay #1
Cooling Fan Relay #2
Fused Power Source
Horn Relay
Ignition Coil
Instrument Panel Lighting and Gauges
Park Lights
Power Antenna
Power Door Locks
Power Windows
Radio/Clock (Constant and Switched)
Tail Lights
Third Brake Light
Turn Signals

The fuel injection harness includes connections for the following components:
A/C Compressor
Cam Position Sensor
Coolant Temperature Gauge
Crank Position Sensor
Data Link Connector
Driver/Pass Front O2 Sensors
Engine Coolant Temperature
Fuel Pump Relay
Idle Air Control
Ignition Coils
Ignition Switch Signal
Intake Air Temperature Sensor
Knock Sensors
Malfunction Indicator Lamp
MAP Sensor
Mass Airflow Sensor
Oil Pressure Gauge
PRNDL Switch
Throttle Position Sensor
Vehicle Speed Sensor
VSS Output for Speedometer

  • Add Your Review
  • Help Stop Spam
    • Which number is lowest 61 or 14?

Painless Performance Logo